|* Post Code:|
|(See unavailable postcodes)|
Pop Up Power Outlets – Made for Australian use
When designing our homes and offices, we are faced with decisions about the smallest of details as indeed it is the trifling aspects of modern spaces that set them apart. When it comes to deciding on electrical fittings however, most people don’t look any further than the white plastic plug assuming that’s their only option.
That’s why Modern Power Solutions revolutionising the way we access power in our kitchens, offices and other spaces.
Stylish, innovative, and accessible power access designed to meet societies growing need for readily available power and data.
MPS Pop Up Power Points feature two Australian Outlets, and two USB Charging outlets to allow users to easily charge their portable devices with little hesitation. Small portable electronic devices that use USB to charge, such as iPhones, Android phones, iPods, MP3 Players, and digital camera… can charge directly from the unit without any external transformer – designed for added convenience.
The ability for Pop Up Power Outlets to easily hide away from a simple push down, or to be extracted from a simple pull up, means they can suit most environments without being in the way of other appliances. They look stylish, and when up, or down – when hidden from use. Installation on tabletop locations allows power to be provided where it is needed most, from kitchen appliances to laptop computers, all commonly used on bench-tops.
Model: MPS V2 Colour: Stainless Steel Material: Stainless Steel
Warranty: 12 Months Australian Warranty – Lifetime parts & repair service
Installation Hole Size: 100-105mm Diameter [102mm for best fit]
Space required below surface: 290mm from top of surface, 100mm in diameter
Module Configuration: 2x Australian Outlets, 2x USB charging outlets [1.05a each]
Cable Length: 2.15m Cable Type: H05VV-F [3x 1.5mm2] Plug: XH022B [250V 10A]
Degree Of Protection: IPX0 [against harmful ingress of water], IP2X [against access to hazardous parts and against harmful ingress of solid foreign objects]
Rated Voltage: 240V~ Rated Current: 10A Technical Model: V2SebNetPUPP
Trademark: SebNet Australian Standards for Components:
Component: USB Model: USB-2A Characteristics: I/P: 230Vac, 50Hz, 150mA O/P: 5Vdc, 2x1050mA Standard: IEC 60950-1:2005+ Am1:2009 +Am2:2013 + Australia deviation Certified: LCIE test report No. : MGE- 14NO1629VTSP- R2 Manufacturer: Cixi Mingye Communicating & Electronic Co., Ltd
Component: Cable Model: H05VV-F Characteristics: 3×1,5mm2 Standard: AS/NZS 60227.5:2003 Inc A1 Certified: SAA SAA090324EA Manufacturer: Ningbo Xuanhua Electrical Co., Ltd
Component: Plug Model: XH022B Characteristics: 250V 10A Standard: AS/NZS 3112:2011 IncA1-2 Certified: SAA SAA091261EA Manufacturer: Ningbo Xuanhua Electrical Co., Ltd
1. A hole size in the desired surface for installation is required. Check model to determine the hole size requirement. Ensure there is enough space under your installation surface, so the unit can fall freely into its hole and sit flush. Check above for model specifications.
2. Unscrew the mounting ring, feed the cable through the mounting hole, then place the unit in the hole.
3. Re-attach the mounting ring and tighten the unit to the surface. Plug the power cable into a power point.
4. The unit is ready to pull up and use!
1 x Stainless Steel – Black Pop Up Power Outlet
FAQ’s [Frequently Asked Questions]:
Q. Is this model spring-loaded and does it automatically come up?
A. No, you are required to pull the unit up manually out of the surface to allow it to ‘pop up’ and be ready to us. We have other motorised models that enable the unit to come up automatically at the puck of a button.
Q. Is the top surface of this model made from genuine Stainless Steel?
A. Yes, this model has a genuine stainless steel top.
Q. What happens if I have a fault with my unit after the warranty period of 12 months?
A. We’ve designed and tested these units for use over 25 years withstanding in a normal working environment. If you do have a fault, we provide an affordable repair service, generally less than $35 [including postage both ways], and our repair staff can fix your unit within 3 days [within Australia]. For example, if you drop something heavy on the unit, and the shell dents heavily, the cost of repair is $30, and we give you the postage label to send it back to us, and we return it to you within 3-5 days. We always keep all spare parts, for all our models, so we will always be able to fix every issue.
Q. Do you provide after-sales-service, and how do I contact you?
A. For many online businesses, both domestic and international ones, after-sales service is poor. We reply to 98% of customer emails within 24 hours, and we work to resolve each of them as soon as possible. We are based in Australia and are easy to deal with. You can contact us via phone – through our ‘request a call back’ feature, where you give us your name and phone number, and we ring you back as soon as we are available too, within 24 hours.
Q. Do I need a licensed electrician to install this product?
A. No, no electrical work is needed to install this product. We have designed the unit with a standard Australian plug, allowing you to plug the unit into any other power point [bellow your installation surface]
Q. Does this product meet Australian electrical standards?
A. Yes, we have tested and certified all our products to meet SAA standards in Australia. Our test reports and certificates are available on our website
Q. What is the warranty that is included with the product, and what is the process that is involved in making a warranty claim?
A. We include 12 months warranty. If your product malfunctions within 12 months, we will repair or replace it for you free of charge. We will cover both [2-way] postage costs, and repair or replace the unit within 5 days. We keep digital receipts matched with product serial numbers for every order, so don’t worry about keeping the transaction receipt. All we require for a warranty claim is a confirmation of your name, address and an approximate date of purchase. From this, you will need to pack the unit securely, and we will send you a prepaid postage label to stick onto the unit. You will then be required to drop the unit off at an Australia Post retail outlet. Once we receive the unit, we will match its serial number with your receipt, and repair the fault, then send it back to you between 3-5 days.